UPDATE: Weather alert for strong thunderstorms in Johnston and Harnett counties Saturday night

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

An updated weather alert was issued by the NWS Raleigh NC on Saturday at 7:53 p.m. for strong thunderstorms until 9 p.m. for Johnston and Harnett counties.

Residents may experience wind gusts of up to 40 mph.

"At 7:53 p.m., Doppler radar tracked a strong thunderstorm near Angier, or 11 miles northeast of Lillington, moving east at 15 mph," says the NWS. "Gusty winds could knock down tree limbs and blow around unsecured objects."

Locations impacted by the alert include Smithfield, Angier, Benson, Selma, Coats, Four Oaks, Coats Crossroads and Buies Creek. This includes the following highways: Interstate 95 between Mile Markers 95 and 77. Interstate 40 between Mile Markers 313 and 334.

The NWS states, "If outdoors, consider seeking shelter inside a building."

This alert is in effect until 9 p.m.

How to react when facing a lightning hazard?

Around 25 million lightning strikes occur in the United States every year, with most taking place during the summer months. The NWS reports that these strikes result in about 20 fatalities annually. The probability of lightning strikes rises as a thunderstorm approaches and peaks when the storm is directly above. As the storm moves away, this likelihood decreases.

Here are recommendations for maintaining safety during a thunderstorm:

• To lower the risk of lightning strikes, when going outdoors, develop a plan to reach a safer spot.
• If the sky becomes menacing and thunder becomes audible, seek out a safe place to seek shelter.
• Once inside, avoid contact with corded phones, electrical equipment, plumbing, and windows and doors.
• Wait 30 minutes after the last lightning or thunder before going back outside.

If finding indoor shelter is not an option:

• Avoid open fields, hill peaks, or ridge tops.
• Avoid tall, isolated trees or other elevated objects. If you are in a forest, stick to areas with shorter tree cover.
• If you are in a group, disperse to prevent the current from passing between group members.
• If you are camping in an open space, choose a valley, ravine, or low area for your campsite. Remember, tents do not shield you from lightning.
• Do not approach water, wet objects, or metal items. Although water and metal do not attract lightning, they conduct electricity effectively.

Rainy weather driving tips

• Switch on headlights - Even during daylight hours, using headlights can enhance visibility and signal your presence to other drivers.
• While on the road - Opt for the middle lanes and remain on higher ground. Rainwater tends to gather along the road edges.
• Keep clear of puddles - Driving through puddles or low rainwater areas can cause vehicles to hydroplane or skid out of control
• Do not follow large vehicles closely - Large vehicles like trucks or buses can create a spray of water that can reduce your visibility.
• Avoid flooded areas - When encountering a flooded road, do a U-turn and head back. The strong currents from flash floods can pull drivers off roadways. Driving through deep water can also negatively affect a vehicle's mechanical and electrical systems.

What is hydroplaning?

Hydroplaning occurs when a vehicle begins to slide uncontrollably on wet roads.

This happens when water in front of the tire builds up faster than the vehicle's weight can push water out of the way. The water pressure then causes the vehicle to rise and slide on a thin layer of water between the tires and the road, making the driver lose control. Hydroplaning is most commonly attributed to three factors:

1. Vehicle speed - When a vehicle's speed increases, the tire-traction grip and ability to control the vehicle decreases. Drive at a reduced speed during wet weather.
2. Water depth - The deeper the water, the sooner a vehicle loses traction on the road. It doesn't matter how deep the water is, even a thin layer can lead to hydroplaning.
3. Tire tread depth - Checking your tire tread before hitting the road is important, as low or no tread can lead to sliding.

In the event of your vehicle hydroplaning, here's what to know:

• Ease off the accelerator - Step off the gas to slow down the vehicle until the tires find traction.
• Turn into the skid - Turning into the skid can help the vehicle's tires realign to regain control.
• Make sure the tires reconnect with the road - During the skid, wait until the tires reconnect with the road and then gently straighten the wheels to regain control.
• Brake gently as needed - Brake normally if the vehicle has anti-lock brakes and pump brakes gently if in an older vehicle.

Source: The National Weather Service

United Robots North Carolina

This story was originally published June 13, 2026 at 4:31 PM.